Bildiagnostikverktyg för alla vag bilar
tex audi, golf, passat, skoda, seat.
kompatibelt med KKL USB Ver 409.1
Från årsmodell 1996 med usb kontakt
Inbyggt interface som passat till vagbilar.
Perfekt för bilverkstan eller för hemmabruk.
7500 felkoder inbyggda på gratis programmet.
OBS! Ingen support lämnas på denna produkt, all användning av bildiagnostikverktyg sker på egen risk!
Konkurrenterna tar 2900kr för produkten
Du kan köra diagnos, hitta fel, radera felkoder
KKL Ver 409.1 VAG-USB VW/AUDI OBD II 2 Interface kabel
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
- Volkswagen
- - Audi
- - Skoda
- - Seat
Reference Data
1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2. Terminal K = Bus of communication
3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
6. Supported also ISO9141 protocol
7.The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
8.Product running as virtual comport, like many products it uses a USB to RS232 converter chip. But under special circumstances this can give some problems regarding timing especially on the handshake lines.
tex audi, golf, passat, skoda, seat.
kompatibelt med KKL USB Ver 409.1
Från årsmodell 1996 med usb kontakt
Inbyggt interface som passat till vagbilar.
Perfekt för bilverkstan eller för hemmabruk.
7500 felkoder inbyggda på gratis programmet.
OBS! Ingen support lämnas på denna produkt, all användning av bildiagnostikverktyg sker på egen risk!
Konkurrenterna tar 2900kr för produkten
Du kan köra diagnos, hitta fel, radera felkoder
KKL Ver 409.1 VAG-USB VW/AUDI OBD II 2 Interface kabel
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
- Volkswagen
- - Audi
- - Skoda
- - Seat
Reference Data
1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2. Terminal K = Bus of communication
3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
6. Supported also ISO9141 protocol
7.The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
8.Product running as virtual comport, like many products it uses a USB to RS232 converter chip. But under special circumstances this can give some problems regarding timing especially on the handshake lines.
Artikelnummer: 10724
